Get Unigraphics Tutorial from begining untul advance here
Please share this blog on your social network, it's make this blog keep a live and have more post,
leave some comment if you need further help

Monday 16 July 2012

Begining Power Drafting in Siemens NX 8

A new method to drafting in Siemens NX 8 is power drafting, it's make drafting more efficient, fast when handle command, part, component because it's more specific in drafting only, to beginning with power drafting, you should select power drafting after click start-siemens, the first environment is like picture below

it does not look much different from previous versions, but keep in mind is only suitable for power drafting drafting process, it is not suitable when used for designing or modeling.
  

Start drafting

to begin drafting, click open to open a new or modeling that you have created, when it appeared browse the file, select parts you want to draft,
then click start (on the icon nx) select drafting (CTRL + SHIFT + D), show the option sheet, in this option you can choose to use an existing template (check the use template), or use Standrad size (from A4-A0) or use custom size. you can also define scale and drawing sheet name in this dialog box.

Use a template

if this option is used then the head will select images directly from the default template Siemens NX, of course, Siemens logo will appear on this option. select a size and click OK to select it.
paper size can also be converted into larger or smaller even though the process of drafting has been done. as well as scale, this choice allows us to drawing quickly, easy layout settings if it is the size of paper you use for drawing needs to change, so does the scale, the scale of standard and custom as a decimal fraction scale can also be included.
or we can also use standard size to make drawing without default template from Siemens NX, to make yout own sheet drafting dimension use custom size, than enter your own paper size.

Insert View 

use icon insert base view , or from main menu klik insert-view-base, then dialog box appear, from this dialog box select the view that want to draft, mainly top view, side, front, bottom left or right view.
just left click on sheet to put those view in drafting area, than move your mouse to make another view, for example when top view use as base view, moving cursor to bottom will give you front view, moving to right will get right view. 


this tutorial special designed for beginner in Siemens NX,  intermediate and advanced user may browse another tutorial in label that available in this blog.
 
 

4 comments:

Unknown said...

nice info

tutorial unigraphics NX7
http://cncprogramer.blogspot.com/search/label/UgNX

Blog said...
This comment has been removed by the author.
Unknown said...

Very Nice Blog Post !

Thanks for sharing...

Keep up updates info...

Unigraphics

Ben William said...

Couldn't be written any better. Reading this post reminds me of my old room mate! He always kept talking about this. I will forward this article to him.Vero Beach Tutoring Pretty sure he will have a good read. Thanks for sharing!

 
Design by Free WordPress Themes | - Premium Blogger Themes |